Primers
IndustrialIndustrial.html
HomeCPS_Coatings.html
Contact UsContactUs.html
AutomotiveAutomotive.html
IndustrialIndustrial.html
  ClearsAutomotive-Clears.html
  PrimersAutomotive-Primers.html
  CatalystsAutomotive-Catalysts.html
  ReducersAutomotive-Reducers.html
  MiscellaneousAutomotive-Miscellaneous.html
  TopcoatsIndustrial-Topcoats.html
  Primers
  MiscellaneousIndustrial-Miscellaneous.html
  ReducersIndustrial-Reducers.html
  CatalystsIndustrial-Catalysts.html
  BasecoatAutomotive-Basecoat.html
  FleetAutomotive-Fleet.html

CPS-3/CPS-RC-3 Red Oxide Primer

Specifically formulated for application to steel surfaces with excellent adhesion, wetting, and application properties. Where recoat with alkyd, phenolic, oleoresinous, latex top coats are required.

Tech Data Sheet (TDS)  Unleaded MSDS

CPS-26 Zinc Chromate Primer

A rust-inhibitive primer for application to steel, aluminum, or galvanized. A better product than CPS-3. May be used for interior or exterior surface under alkyd, oil, oleoresinous, and latex coats; for structural steel, tanks, piping, equipment, etc.

Tech Data Sheet (TDS)  Leaded MSDS

CPS-20 Universal Primer (Gray)

CPS-74 Universal Primer (Red)

Contains a phenolic modified vehicle with zinc phosphate and iron oxide inhibitors. A good choice when the job calls for something better and faster than an alkyd primer. An excellent choice for use under urethanes, or other systems with high solvent strength. Very little chance of incurring any recoat lifting.

Tech Data Sheet (TDS)  Unleaded MSDS

CPS-96 Gray Primer Sealer (Non-Sanding)

Contains a phenolic modified vehicle with zinc phosphate and iron oxide inhibitors. This product is perfect as an equal or replacement to the automotive type non-sanding sealers to give good solvent hold out and create a uniform surface without a lot of film build. It sprays out slick and dries fast without dusting. The main difference to the automotive sealers is, this product is good on bare metal.

Tech Data Sheet (TDS)  Unleaded MSDS

CPS-320 Epoxy Primer (Gray)

CPS-330 Epoxy Primer (Beige)

CPS-331 Epoxy Primer (Red)

CPS-377 Epoxy Primer (White)

Two component polyamide epoxy with iron oxide zinc phosphate inhibitors. For metallic surfaces requiring epoxy, urethane, and vinyl corrosion and chemical resistant topcoats. Where maximum corrosion resistance and overall durability are required.

Tech Data Sheet (TDS)  Unleaded MSDS

CPS-4467 Coal Tar Epoxy

A two package amine cured epoxy recommended for barges, interior tank linings, offshore structures, docks, pipelines, fertilizer mixers, frac tanks etc.

Tech Data Sheet (TDS)  Leaded MSDS  Unleaded MSDS